GoPro MISSION 1: What it really changes underwater

I spent two years in the Maldives with a GoPro HERO attached to my wrist. Two years of filming manta rays in 4K, struggling with the automatic white balance, and complaining about digital noise every time the light decreased. And every time, the same frustration: a tiny housing, with quality that plateaus.

When GoPro unveiled the MISSION 1 series at the NAB show in April 2026, I first thought it was a publicity stunt. A 1-inch sensor in a 207-gram body? 8K at 60 frames per second? An integrated Dive mode that adjusts colorimetry and stabilization for underwater use?

Then I looked at the specifications more closely. And then, I realized that something had finally changed for good.

Underwater, light is your most valuable resource. It disappears quickly. Warm colors disappear as soon as you are 5 meters deep. And digital noise becomes your worst enemy as soon as you descend beyond 15 meters.

The GoPro HERO used a 1/1.9-inch sensor. The MISSION 1 switches to a 1-inch sensor with 50 megapixels and 3.2-micron pixels in Quad Bayer mode. In concrete terms, this means that each pixel captures much more light. GoPro announces up to 14 stops of dynamic range on the sensor.

For us, underwater photographers, this is huge. It means: less noise at depth, details in the shadows that we've never had on an action camera, and a post-production editing margin that is close to what we get with a professional compact like the Olympus TG-7.

And all of this in a housing that fits in the palm of your hand.

This is the feature that most impressed me. The MISSION 1's Dive mode automatically adjusts stabilization and color science for the underwater environment. No more aggressive stabilization that creates artifacts when you surface. A color science that takes into account the absorption of red by the water.

Attention: At AquaExposure, we remain faithful to our method. We always recommend setting the white balance to 5000K in fixed mode and using the Flat profile to maintain maximum flexibility in post-production. The Dive mode is an excellent starting point for beginners, but true mastery comes from manual control and targeted editing.

What is certain is that GoPro has finally listened to the underwater community. And that is a significant signal.

The numbers are impressive: 8K at 60fps, 4K at 240fps for slow motion, and even 960fps in 1080p for 10-second bursts. The GP3 processor, fabricated in 5 nanometers, which drives all of this, also promises significantly improved thermal management and battery life.

In practice, for underwater photography and video, this means the following:

The 4K240 slow motion allows us to capture the details of animal behaviors that we were previously missing. A whale shark opening its mouth to filter plankton, the deployment of a jellyfish's tentacles, the movement of a nudibranch's gills. These sequences, properly edited in DaVinci Resolve, become an incredible educational tool.

The 8K, on the other hand, offers a massive cropping margin. You can film wide and crop in post-production in 4K without any noticeable loss. For subjects that maintain their distance (and always respect their comfort zone), this is a significant advantage.

This is where we temper the enthusiasm.

The MISSION 1 and MISSION 1 PRO are waterproof up to 20 meters without a housing. For most recreational divers, this is sufficient. However, if you dive regularly at 30-40 meters, you will need the GoPro protective housing, which goes down to 60 meters, for 50 euros.

The real challenge concerns the MISSION 1 PRO ILS, the interchangeable lens model for Micro 4/3 mounts. This model is only weather-resistant, not waterproof. To use it underwater, you will need a housing suitable for each lens configuration. And to date, GoPro has not yet announced a dedicated solution for ILS.

All the potential of this camera for underwater use will depend on GoPro's ability to quickly and effectively provide housings suitable for the lenses. Without this, the MISSION 1 PRO ILS remains an exceptional surface camera, but unusable for diving.

This is the key question: Will GoPro invest in the underwater ecosystem, or will third-party manufacturers (Isotta, Nauticam, Seafrogs) fill the gap? Recent history shows that third-party housings often arrive 6 to 12 months after the release of a new housing. And 12 months, in the evolution of the market, is a very long time.

Here's what I apply right after taking the MISSION 1 out of its housing before a dive. These settings are the result of field testing, not manufacturer specifications. They may evolve with firmware updates, but the principles behind them remain the same.

The complete setup

Resolution: 4K 60fps This is the recommended entry point. 8K is available and tempting, but it generates massive files and can create thermal constraints on long dives. 4K 60fps offers a 2x slow-motion that can be used in post-production (by reducing to 30fps) and a quality that is more than sufficient for all uses, up to high-quality web distribution.

White Balance: Native or Fixed 5000K - Never Automatic This is the most important and most often overlooked rule. In Auto mode, the GoPro continuously recalculates the white balance, creating variations in color from one shot to the next. Two shots filmed at the same depth, with a 30-second interval, can have incompatible colors in post-production. By setting it to 5000K, you achieve perfect consistency throughout the entire session. In Native mode, the camera captures the raw signal without interpretation, giving you maximum flexibility in post-production.

Color Profile: Flat The raw image will be gray, dull, and lifeless on the screen. This is exactly what we want. A Flat profile compresses highlights and brings up shadows to preserve the maximum amount of information in the file. This "ugly" file will contain the details that you will retrieve in DaVinci Resolve or Lightroom. A Standard or Vivid profile "cooks" the colors internally – something that the camera destroys during encoding cannot be recovered.

Bitrate: High Underwater, images are complex: many fine details (coral, texture of animals), constant movement (current, bubbles, living subjects), and significant contrast between light and shadow areas. A low bitrate creates visible compression artifacts, especially in areas with transitions between similar colors. The High mode requires more disk space - plan for microSD cards suitable for the required writing speed.

Maximum ISO: 1600 The 1-inch sensor of the MISSION 1 handles high ISO values significantly better than previous generations. However, 1600 remains the limit beyond which digital noise begins to degrade the texture of biological surfaces (fish skin, coral structure). Beyond this, noise reduction in post-production begins to "plasticize" these surfaces. If the light is insufficient for 1600 ISO with an appropriate aperture, it is a sign: the conditions are not optimal for filming, not a setting issue to avoid.

EV: -0.5 A slight preventative underexposure. Underwater, bright areas (surface reflections, very bright areas near the sandy bottom) quickly become overexposed. At 0 EV, the MISSION 1 can "burn" these areas and permanently lose information. At -0.5, you retain detail in the highlights and recover the dark areas in post-production. It is always easier to recover the shadows than to rebuild an overexposed area.

QuickCapture: activated A single press of the recording button to start without opening the interface. Underwater, with gloves or in the event of an unexpected animal behavior, every second counts. QuickCapture eliminates one step in the process and avoids missing the first seconds of an interesting scene.

Sleep timer: more than 10 minutes A GoPro that goes to sleep between underwater scenes is a common problem. Between encounters with marine life, there can be 5, 10, or sometimes 15 minutes of inactivity. Set the sleep timer to the maximum to avoid having to turn on the camera at the exact moment a whale shark swims past you.

Storage: minimum V30 microSD card, V60 recommended At 4K60 with high bitrate, the MISSION 1 writes a lot of data. A too-slow card causes invisible micro-cuts during recording, but these are clearly visible in the editing process. Always bring a spare card while diving.

Since this article first went live, things have moved forward. The first MISSION 1 and MISSION 1 PRO units started reaching divers in late May 2026, and GoPro confirmed that the work was far from finished.

The manufacturer announces improvements still to come on three fronts that concern us directly: the underwater mode, the low-light behaviour, and the Log profile for grading. In other words, the camera you buy today is not quite the one you will hold in a few months.

The PRO ILS version with interchangeable lenses, for its part, is expected later in the third quarter. The dedicated housing question stays wide open, and it is still the one that will decide whether this camera becomes a real diving tool or remains a surface marvel.

For us, in the field, it is this evolution of the native underwater mode that deserves the most attention. Better handling of light at the source will always beat one more accessory clipped onto the housing.

I hold the same line as on day one. I do not rule on a spec sheet, and I will update this section as soon as the camera has spent enough time in the water for my opinion to be worth something.

Is the GoPro MISSION 1 waterproof without a housing?

The MISSION 1 and MISSION 1 PRO are waterproof up to 20 meters without a housing. To go deeper, the Protective Housing extends the depth to 60 meters for €50. The MISSION 1 PRO ILS (interchangeable lenses) is only weather-resistant and requires a dedicated housing for all underwater use.

What settings to use to film underwater with the MISSION 1?

AquaExposure recommends: 4K60, fixed white balance at 5000K or Native mode, Flat profile, High bitrate, ISO max 1600, EV -0.5. These settings preserve the maximum amount of information for post-production editing. The Auto Dive mode is suitable for beginners, but mastery comes through manual control.

Does the MISSION 1 replace a compact camera with a housing for diving?

For video, the 1-inch sensor fills a large part of the gap with expert compacts. The cropping margin in 8K is considerable. For still photography and macro, a compact offers even more control over exposure and focus. The choice depends on your primary use.

Should I get the MISSION 1 or the MISSION 1 PRO for diving?

The MISSION 1 (430 euros with subscription, 599 without) is sufficient for most divers who film in 4K. The PRO (610 euros) adds 8K60, a low-light mode in 4K60, and a Log profile for advanced color grading. If you do fine color correction in DaVinci Resolve, the PRO is worth the investment.

When does the GoPro MISSION 1 PRO ILS with interchangeable lenses come out?

The MISSION 1 and MISSION 1 PRO started shipping in late May 2026. The PRO ILS version with interchangeable lenses is expected later in the third quarter of 2026. GoPro confirmed in parallel that the underwater modes, the low-light mode and the Log profile would keep evolving through firmware updates over the summer.

*Want to get the best results from your GoPro underwater? Our training teaches you the techniques for taking and post-processing photos that make a difference, no matter your level.

• Access the complete AquaExposure training
• Underwater photography training in Belgium
• Discover our articles